Straw Cap for 12, 16 and 22oz Bottles, Carbon


Straw Cap for upright, spillproof sipping (no tipping required). Bottle not included. Trim to size.

- Includes 1 Straw Cap and silicone straw (bottle not included)

- Cap is compatible with all 12, 16 and 22 oz Lifefactory bottles

- Straw measured to fit 22 oz bottles (8.75""); can be trimmed/snipped to fit 16 (7.5"") and 12 (6.5"") oz bottles

- Medical grade silicone

- All components made in the U.S.

- Dishwasher safe. Place spout in open position and remove straw. Place cap on top rack.

- BPA/BPS-free and phthtalate-free

Straw Length:

8.75" for 22 oz bottles.

Trim to fit 16 oz (7.5")

Trim to fit 12 oz (6.5")

Straw Cap Care & Use


- Bottle, sleeve and cap are dishwasher safe.

- Before first use, wash all parts in hot soapy water or dishwasher.

- Place straw spout in open position to allow flow of water through the cap.

- Remove silicone straw for proper and thorough cleaning.

- Place cap on top rack of dishwasher.

- Silicone bottle sleeve does not need to be removed. If you wish to remove the sleeve you can use warm soapy water or spray the bottle with rubbing alcohol and sleeve will slide off easily.


- Flow Control: Straw spout must be in full, open position for water to flow. This is designed to prevent leaking. Also, make sure the straw isn't creating suction at the base of the bottle. If so, snip a bit off the straw with scissors. For example, this can occur if you use a straw purchased on a 22 oz bottle on a 16 oz or 12 oz bottle because the straw length is longer.

- Noise: If you experience any humming or whistling noise while sipping, try moving/adjusting the small light grey umbrella valve that you see in the channel when the straw spout is in open position. This valve controls air flow and prevents leaking.

- Pressure: Straw caps may develop excess pressure under certain conditions (e.g., hot day left in a car, flying on an airplane) that can cause the liquid to stream out of the spout when opened. To relieve pressure (and avoid eruption), simply unscrew the cap and release pressure. Rescrew the cap and then open the spout.

- Do not leave children unattended with this product.

- The silicone sleeve is protective but does not guarantee against breakage.

- If cracks or breaks appear, safely dispose of the bottle immediately.

- Extreme temperature differences between glass and liquid may cause cracking or breaking of glass.

- DO NOT FREEZE THE BOTTLE. Liquid expands when frozen and can crack the bottle. DO NOT BOIL THE BOTTLE. Rapid temperature changes may crack the bottle.

- Not intended for use in a microwave.

- Take care when using hot drinks as bottle will be hot to the touch (risk of burning). Run warm water in the bottle before adding hot liquid to temper the glass.

Customer Reviews

Based on 2 reviews Write a review


Shipping & taxes calculated at checkout

It appears that your cart is currently empty!

Continue Browsing

View full product details